​NEEDLE VALVE

​Needle valves are the suitable valve to use whenever pressure heads or flow rates need to be safely and  reliably reduced and controlled. They are used for two main tasks:
  • By restricting the cross-section, a change in flow rate, flow velocity and pressure is forced, which results to higher stress in the valve. The valve must therefore be designed so that potential cavitation cannot cause any damage whatsoever.
  • To be able to control the pressure and flow precisely and finely, the control valve’s control characteristics must be as linear as possible over the whole opening range.
Thanks to their well thought out design, ERHARD needle valves fulfill these requirements to the greatest possible degree and are therefore the ideal valve for numerous control tasks.
Even if butterfly valves and gate valves are used for such tasks in individual cases in practice, due to their design as an optimum shut-off device for “OPEN/CLOSED” operation, but they are not suitable for continuous use as a control valve.
Click the cog below for downloadable TechSpec. ​
Erhard Needle Valve Component guide.pdf
File Size: 1317 kb
File Type: pdf
Download File
No.
Advantage
Property
1.
Economic use and protection against stagnant water
Optimised flow performance and flow guiding for practical Zeta values, minimum pressure losses
when fully opened
2.
​Precisely controllable flow characteristics.
Control range up to 96% and slider crank mechanism with precisely adjusted characteristic curve.
3.
​Safe and reliable pressure reduction to prevent cavitation damage.
Control inserts for every application: seat ring, vaned ring, slotted cylinder, perforated cylinder and other special inserts.
4.
​Minimum gasket wear.                          
Wide main gasket in the cavitation-free space and additional shaft seal.
5.
Long life of the valve.  
Four hard-faced guides and optimised corrosion protection with EKB fusion bonded epoxy.
6.
​Wide range of pressure ratings, nominal sizes  and designs.
​Adapted solutions for numerous special applications.
7.
Perfect adaptation to all installation situations.
​Standardised connections for all types of actuators.

A Infrastructure Company

This website is owned and operated by Wolseley UK Ltd. Registration number: 00636445. Registered: England.
Registered Office: Wolseley UK, 2 Kingmaker Court, Warwick Technology Park, Gallows Hill, Warwick, CV34 6DY.