TALBOT PUSHFIT RANGE
|
Cascade are pleased to be able to offer The Talbot range of pushfit fittings is a tried and tested method for connecting Polyethylene pipe from 16mm to 63mm diameter.
The Talbot range is user friendly thanks to its simple push and twist connection. No mechanical jointing, no over tightening and no risk of missing a nut. Additionally the Talbot fittings are stronger than the pipe, this is achieved by the fittings grip and seal on the pipe increasing with water pressure and tensile load. Adaptor from Imperial to Metric Pipe: Select the fitting type you need, and using the imperial components that are available, convert the fitting to an adaptor. |
Key Benefits/Features
|
|
Talbot Pushfit - PE to Lead Pipe Conversion (Leadfit)
The Talbot Leadfit fittings are quick and easy to assemble, the pipe is simply pushed fully home into the fittings, past both the grip & the O-Ring, no further tightening is required. The Pushfit principle ensures that the pipe is held securely within the fitting, and seals up to 16 bar.
The Leadfit fitting utilities a standard Talbot body with a set of specially designed inter-changeable components that enable Talbot Leadfit fitting to grip and seal on lead pipe. |
The Talbot Leadfit fitting is available in two forms, firstly a range of pre-assembled fittings for connection to lead pipe. Lead to PE adaptors, lead to female or male threaded adaptors as well as lead to copper adaptors are all available. Secondly an alternative to buying a pre-assembled fitting and in order to give users full advantage of the flexibility and extensive range of the Talbot Pushfit connection, Talbot Leadfit components are also supplied separately and can quickly and easy convert any pushfit fitting into a fitting for lead pipe. Fittings and components are available for lead pipe in 3/4" (29.41mm) using 32mm Pushfit bodies and 1" (39.22mm) using 40mm Pushfit bodies.
See below Assembly and dismantling instructions to see how easy using the Talbot Range is.
|
Talbot Grippa - Universal Service Connector
|
|
|
The Talbot Grippa is a universal fitting that connects on the a wide variety of exciting lead, galvanised iron and copper with no change of components. The range consists of just three fittings which suit all metal pipes with outside diameters from 15mm to 34mm.
Benefits
|
For more information on the range and technical specifications please see downloadable TechSpec Brochure below.
| Talbot Connections Catalogue.pdf |
For details on products for the housing market, manifolds, meter boxes please see the downloadable brochure below.
| Talis UK house connections catalogue.pdf |
Infrastructure Company